Sanken

The very popular Sanken COS-11 is a miniature omni directional lavalier microphone widely used in T.V and theatre applications. This 11D BP model has a 3m cable and is fitted with an XLR adaptor for powering via 48V phantom or an AA cell. All models are available in grey, black or beige and are supplied complete with standard accessories: croc. clip, metal windshield and rubber mount.
More info...

Fitted with 1.6m cable and your choice of Lemo connector for Audio Ltd. or Micron radio transmitters, or TA5 for the Lectrosonic range of radios, 5 pin Binder for Audio Envoy En2 Pro systems, or the 3.5mm Locking mini-jack conenctor that is suitable for Audio Ltd. Envoy En2 and Sennheiser G3 evolution systems.

That is a lot of choice of connctors! We try to keep them all in stock at all times!

Supplied with the standard accessories (the funky little rubber mount, horizontal clip and metal windshield)

Do you like to mount your Sanken Cos11 using double sided tape and use a small piece of fur to give you wind protection?

Do you always lose your small pieces of fur? Do they break? Wish they were a tad easier to re-use?

Enter the Four Seasons Furry Mount from LMC for the Sanken Cos 11 or the FSFM11 for short!

This is a convenient rubber mount with a permanently attached piece of fur.

Slip your Cos11 into the rubber mount. Use your favourite double sided sticky tape (Like Joe's below) to attach the mount to skin or fabric and you are away!

Cooking with gas!

The guys from LMC Sound have done it again.

This is a small block of rubber that is held in place by tension around the body of the mic. It has two flat surfaces to allow it to be taped in place. Eliminate sticky residue on your mics when you tape them down and provide shock protection as well. Ideal for mounting in the knot of a tie!

A shorter version is available if you want to use it with the windscreen.

The guys from LMC Sound have done it again.

This is the shorter WS (windscreen) model of the ISO rubber mount.

This is a small block of rubber that is held in place by tension around the body of the mic. It has two flat surfaces to allow it to be taped in place. Eliminate sticky residue on your mics when you tape them down and provide shock protection as well. Ideal for mounting in the knot of a tie!

A longer version is available if you want to use it without the windscreen.

Joe Sticky Stuff is a wonderfully versatile adhesive for use on movie sets or anywhere that you need effective adhesives that are pliable and removable with no left over residue or damage. This includes microphone placements that require secure mounting and quick removal. No holes, no peeling drywall. Joes Sticky Stuff comes in a reusable tin container with 21.5 ft of material 1/2" wide.

Finally a vampire clip for the Sanken COS 11! Designed by a location sound mixer. The Vclip vampire clip was created exclusively for use with all models of the Sanken COS 11 lavalier microphone. Facilitates quick mounting of your microphone to many clothing materials without sacrificing sound quality. The mic capsule slides into the Vclip tubing for a snug fit.
Available Colors: Black

More pictures...

Introducing the sequel to the Vclip. Using the same Vclip design the Vclip-WS gives you the alternative option of mounting your Sanken COS 11 with the Sanken WS-11 windscreen. Available in black only, windscreen not included!

As the name suggests, a double clip in black for the Sanken COS-11

Sanken part no. HC-11W-BK

Very small cardioid, boundary layer mic. Although measuring only 32mm in diameter and 12mm in height the CUB-01 provides excellent sound quality and can be used in situations where it is difficult to use other types, eg. taped to a car ceiling. XLR connector, phantom power, available in grey or beige.

Now in stock!
The Bubblebee CUB01 is built for the Sanken Cub-01 microphone.

This microphone from Sanken is a small and light mono short gun. In common with other Sanken designs it maintains its directional characteristics down to a lower frequency than other widely used gun mics. It also has very little rear lobe sensitivity so will be very useful in situations with high ambient noise. We are quite impressed with this mic. Please note that this price is for the bare mic. - please call to talk about windshield options. (029) 2034 2907

The CS-3e is a very directional shotgun microphone which maintains its directional characteristics across a wide frequency range. It can therefore often be used even in difficult situations with high levels of ambient noise.

The CSS-5 is a stereo shotgun microphone with 3 switchable operating modes. In mono mode it provides highly directional pick up across a wide freqency range. In Normal mode it provides the same centre characteristics but with accurate stereo information as well. The 3rd setting is wide stereo which increases the coverage angle to 140 deg. for recording of atmos. and sound effects.