Rycote InVision Broadcast Suspensions

Fitted with:
2 x 9.5mm clips with InVision (43mm wide) lyres, and a reducing sleeve
Standard bar with 25mm (1") centres
Sleeve clips onto the microphone connector and the cable, leaving the microphone casing free to be fitted with a foam windscreen if required

Suitable for following microphones:
AKG C747,Ambient TinyMic, Audio Technica AT853a, PRO45, AT831b, AT803b, PRO35, PRO70, ATM350, ES933, DPA 4053, 4052, 4036, 4033, 4028, 4023, MBHO KA Series w/MBP 648A, Milab VM-44, Schoeps CCM (Lemo), Sennheiser ME36.

Fitted with:
1 x 20mm clip at the front and 1 x 9.5mm clip at the rear, with InVision (43mm wide) lyres
Standard bar with 25mm (1") centres

Suitable for following microphones:
Neumann KM 100 & KM-D series (remote), RODE NT6, Schoeps MK w/KC active cable, CMC w/KC active cable, CCM Ug, Sennheiser MKH 8000 series with MZL

Fitted with:
2 x 20mm clips with InVision (43mm wide) lyres
Standard bar with 25mm (1") centres

Suitable for following microphones:
AKG C 430, Bauer C2, Behringer C2, DPA 4027, 4022, 4021, MBHO MBNM 410, Sennheiser MKH8000 Series w/MZX8000

Fitted with:
2 x 9.5mm clips with Standard (70mm wide) lyres, and a reducing sleeve
Standard bar with 25mm (1") centres
Sleeve clips onto the microphone connector and the cable, leaving the microphone casing free to be fitted with a foam windscreen if required

Suitable for following microphones
AKG C 747; Ambient TinyMic, Audio Technica AT853a, PRO45, AT831b, AT803b, PRO35, PRO70, ATM350, ES933, DPA 4053, 4052, 4036, 4033, 4028, 4023, MBHO KA Series w/MBP 648A, Milab VM-44, Schoeps CCM (Lemo), Sennheiser ME36

Fitted with:
1 x 20mm clip at the front and 1 x 9.5mm clip at the rear, with Standard (70mm wide) lyres
Standard bar with 25mm (1") centres

Suitable for following microphones
Beyer CK930, Neumann KM 100 & KM-D series (remote), RODE NT6, Schoeps MK w/KC active cable, CMC w/KC active cable, CCM Ug, Sennheiser MKH 8000 series with MZL

Fitted with:
2 x 19-25mm universal clips, with Standard (70mm wide) lyres
Standard bar with 25mm (1") centres
Maximum microphone length 120mm

Suitable for following microphones
AKG C 430, Bauer C2, Behringer C2, DPA 4027, 4022, 4021, MBHO MBNM 410, Sennheiser MKH8000 Series w/MZX8000, Audio Technica AT3528, AT3527, AT4053a, ES973, ATM33a, ATM10a, AT804, PRO37, PRO24-CM,PRO24, ATM450, M-Audio Pulsar II, Neumann KM 100 series, Sennheiser e906

Fitted with:
2 x 19-25mm universal clips, with Standard (70mm wide) lyres
Long bar with 70mm (2.75") centres

Suitable for following microphones
AKG ULS W/C451, C 568 EB, D130, CK63, 460, CK61 C460 B, CK1 460, CK1 451, CK93, SE300 B, CK92 SE300 B, CK91 SE300 B, ULS W/C480, ULS W/C460, Audio Technica AT 835ST, AT 825, AT 822, AT4051a, AT4049a, AT3032, AT3031, AT4041, AT3031, AT897, AT4073a, AT875R, AVE Stuttgart ACM 20, Azden SMX-10, SGM-X, SGM-2X, Beyer MC 836, MCE 87vs, MC728, MC718, M69, MC713, MC723, M201, M88, M160, MC 836, MCE 86, ClockAudio C 850 E, DPA 4017, 4011, Eathworks SR 20, SR 25, SR 30/4c, SR 30, Edirol CS-50, Neumann KM 100 F, KM-D Series, KM 185, KM 184, KM 183, KM 180 Series, KMR-81i, Nevaton MC 401, MC 49, Oktava MC 012, Paso MC 250, Pearl MS 2, Rode NT5, NTG-1, NTG-2, NTG-3, Samson CL 2, CO 2, Sanken CMS 9, CMS 7, CMS 2, CUW-180, CS-1, CS-3, Schoeps CMIT - 5U, CMC series, CMC Series with Cut 1, Sennheiser ME80, K3U, ME66 K6, MKE 44P, ME65 K6, ME64 K6, ME62 K6, MKH 406, MKH 416, MKH20, MKH40, MKH50, MKH60, Shure SM 81, SM 94, VP 64AL, VP 64A, KSM 141, KSM 137, KSM 109, Sony ECM 670, ECM 678, ECM 674, ECM 673, ECM 680S

Fitted with:
2 x 30mm clips, with Standard (70mm wide) lyres
Long bar with 70mm (2.75") centres

Suitable for following microphones
Neumann RSM 191, RSM 190, Pearl MSH10, Sony ECM 999, ECM 979, ECM 959

INV-9 has been designed for either boompole or static use.
It has the long bar and is suitable for mics of up to 30mm in diameter, such as the Shure SM57 or SM58 and the Neuman KMS 105 microphones.
The standard lyre webs are 70mm wide to provide improved isolation when used on a boom, fit on a long bar and can be adjusted and tightened by the star knob.
Available with 30mm clip front and 19mm-25mm universal on the back.

Fitted with:
1 x 30mm clip front & 1 x 19/25mm lyre back , on Standard (70mm) lyres
Large bar- 70mm (2.75") centres.

Suitable for following microphones
Neumann KMS 105, Shure SM 57, SM 58

A 70mm ( or 2 3/4" in your old money) wide table stand from Rycote.

It has a non-slip rubber base, and a 3/8" thread.

Can be used with a microphone or a portable recorder.

Rycote suggest you don't use this with mics longer than 250mm.

The InVision® INV-7HG MKIII Stereo Pair Kit is a vibration-resistant, low-noise suspension system designed to mount paired microphones for stereo recording.

The Kit comprises two of Rycote's patented vibration-reducing Lyre® suspensions mounted on a rigid, slotted stereo bar. The dual InVision INV-7 HG MkIII Lyre® webs used in the Stereo Pair Kit can accommodate larger shotgun mics from 19 to 25mm in diameter, and up to 300mm long. The spacing between the two webs, and thus between the two mounted microphones, is quickly and simply adjustable from 40 to 200mm on the slotted bar by loosening a brass wheel under each Lyre and moving it laterally as required. A star-shaped knob underneath each Lyre® also allows each mic to be rotated and/or inclined, and then secured once optimal stereo imaging has been achieved.

The complete kit may be fitted to mic stands with 3/8-inch or 5/8-inch threads (adaptors for both types are included)